I sugest you set your ip to an address on the subnet and leave ping running. From above you can see that the compressed fs is at mtd0, so the resulting number is where mtd1 ends and mtd0 starts. You can see the JTAG header pictured below. The only one thats important is the openwrt-ar You can see the mtd information with: Do not turn on the modem yet.
Uploader: | Kazratilar |
Date Added: | 16 October 2014 |
File Size: | 55.34 Mb |
Operating Systems: | Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X |
Downloads: | 52649 |
Price: | Free* [*Free Regsitration Required] |

It employs the following hardware: Enter printenv to get an output similar to the following please note that not all lines are shown; Xdam2 have included only the lines that interest us:. Each pair of values defines a starting position and an ending position. From above you can see that adam compressed fs is at mtd0, so the resulting number is where mtd1 ends and mtd0 starts. This location is where the compressed filesystem is kept.

We will connect to this ip later on. At the bootloader prompt issue the following command: Save the file as custom.
ADAM2 | Modemizer
To find out more, including how to control cookies, see here: The Netgear DGG v3 board. Doing so may render your router unbootable.
For those other cases check this. The serial port is located at the top left side. C Copyright Telogy Networks, Inc.
Tag Archives: ADAM2
PuTTY serial connection settings. You should see a bunch of on the screen thanks to the hash command, so you can see everything is working well.

In my previous post we installed OpenWrt Do not turn on the modem yet. You want to find the ip address entry. Press enter to stop the OS from loading and get the bootloader prompt.
When you reboot, the modem should come up with the ip address I purposefully set mtd1 to a bogus starting address 0xto see if ADAM2, unable to locate the OS, would drop me to the prompt. Upon rebooting the modem I received the following through my serial connection: As soon as the modem is turned on you will see the following output in PuTTY:. At the ftp prompt issue the following command:. Close regedit and reboot. The only thing left to do now is to reboot. There is a guide on the OpenWRT wiki, its important to read as I will be glossing over the details here.
The modem was bricked.
Switch to PuTTY and enter go: Jerry Kaidor on Quick simple encrypted loopbac…. To modify the values of mtd1 and mtd0 we issue the setenv command, followed by the parameter we wish to modify and its new values, as shown below:.
Change to the directory where you saved the OpenWrt firmware and open an ftp connection to Time to debrick To ada,2 from this state you need to connect to the modem through its JTAG interface. Once you are at the bootloader prompt you can see all the available commands by adam22 help.
The mtd variable I modified, thus bricking the modem. Instead you need to manually upload the firmware with the ADAM2 ftp.
No comments:
Post a Comment